Architectural Precast Panels: Curved, Formliner and Cast-in Brick Finishes
XL Precast gantry crane lifting a precast concrete panel at their facility

Architectural Precast Panels: Curved, Formliner and Cast-in Brick Finishes

Architectural precast panels are factory-made concrete panels designed for how a building looks as well as how it performs. This guide covers three finishes that give a facade real character: curved panels cast in steel moulds, formliner panels with a textured pattern, and panels with brick cast into the face. Each one arrives on site finished and ready to lift into place. We explain how each finish is made, how to choose between them and when to bring us into your project. 

What Are Architectural Precast Panels? 

These are precast concrete panels where the face is part of the design, not just the structure behind it. The shape, colour, texture or material is set in the mould, so the finish is consistent across every panel. Architectural precast concrete can also carry load, insulate and meet fire and acoustic requirements, so one panel does several jobs. Our architectural precast panels are made to precise tolerances and can include openings, services, door and window frames, and connection details. Every panel is made in a controlled factory, so quality and programme certainty do not depend on the weather, and pre-painted panels can be delivered fully finished to reduce painting and scaffolding on site. 

How Are Curved Precast Panels Made? 

Curved precast panels are cast in steel moulds shaped to the radius your architect specifies. The steel holds its form across repeated pours, so each panel matches the last. The result is a smooth, continuous curve in concrete, without the joins and compromises of building the shape from flat pieces. Curves work well at building corners, entries, feature walls and soft transitions along a facade. Openings, services and connection details are cast in at the same time, so a curved panel still arrives ready to install. A custom steel mould takes time to build, so curved precast panels pay off where the same radius repeats across several panels. 

How Do Formliner Panels Get Their Texture? 

Formliner panels get their texture from a rubber liner fixed inside the mould before the concrete is poured. When the panel is stripped from the mould, the pattern is left in the surface. Ribs, timber grain, stone effects and geometric patterns are common, and because the pattern comes from the liner, it repeats exactly from panel to panel and gives the whole project a consistent look. Formliner suits walls that would otherwise be plain, such as those on industrial buildings, data centres and car parks. The pattern catches light and shadow throughout the day, and it helps hide the minor marks that any large concrete surface collects. 

What Are Cast-in Brick Panels? 

A cast-in brick panel has bricks set into the mould before the concrete is poured, so the brick and concrete bond into a single panel. You get the look of a brick wall without laying bricks on site, and the panel arrives ready to lift into position. One lift installs a large area of brick facade, which closes in the building envelope much faster than laying bricks course by course. Cast-in brick is becoming a popular option because it removes bricklaying, and the scaffolding that goes with it, from your programme. The brick pattern and colour are set before the panel leaves the factory, so the finish does not depend on weather or site conditions. 

How Do You Choose Between Curved, Formliner and Brick Finishes? 

Start with what the facade needs to do. Choose curved panels when the form of the building is the feature. Choose formliner when you want texture and shadow across large walls. Choose cast-in brick when the surrounding streetscape or planning controls call for brick. You can also combine finishes on the same project, and colour oxides can be added to any of our products. Fire rating, acoustic performance, insulation and structural capacity can be designed into the same panel, so the finish does not mean giving up performance. 

When Should You Involve Your Precast Manufacturer? 

As early as the concept stage. Many projects start with preliminary drawings, and mould design affects both cost and lead time. We review the design with you, point out where precast can save money and provide value engineering before construction begins. Our shop drawings and 3D modelling show every panel in place, so clashes with structure, services and openings are resolved before casting. Precast concrete panels install significantly faster than in-situ concrete, with fewer wet trades and better programme certainty, and we coordinate transport and on-site installation so panels are delivered and installed efficiently and safely.  

At XL Precast, our two factories in Smithfield, NSW and Yatala, QLD each have more than 10,000m² under roof and produce approximately 20,000 precast elements a year between them, which lets us hold delivery dates across large facades with repeating panels. 

Talk to Us About Architectural Precast Panels 

Send us your concept or a fully resolved set of drawings, and we will tell you which panel finish suits your project and what to settle first. Since relaunching as XL Precast in 2010, we have delivered close to 1,000 projects across NSW, QLD, the ACT and WA, and you can see recent work on our precast projects page. Contact our team or call (02) 8724 5100 in Sydney or (07) 3803 4838 in Brisbane. 

Frequently Asked Questions 

What are architectural precast panels? 

Architectural precast panels are factory-made concrete panels where the finish is part of the design. Shape, colour, texture or brick is set in the mould, and the panel can still carry load and meet fire and acoustic requirements. 

Can precast concrete panels be curved? 

Yes. We cast curved precast panels in steel moulds shaped to the radius your architect specifies. A custom mould takes time to build, so curves suit designs where the same radius repeats across several panels. 

What is a formliner panel? 

A formliner panel is a precast panel cast against a rubber liner that leaves a pattern in the concrete surface. Ribs, timber grain and stone effects are common, and the pattern repeats exactly across every panel. See our precast panels page for more. 

Leave a Reply

Close Menu